| Customization: | Available |
|---|---|
| After-sales Service: | Support Online |
| Warranty: | Online |
|
Still deciding? Get samples of US$ 30000/Piece
Request Sample
|
Suppliers with verified business licenses
KEY FEATURES
Engine Power :The successful Yanmar T4F engine guarantees reliable performance, even in difficult working conditions.Durability:The reinforced structure improves stability and extends the service life.
Fuel Consumption:The intelligent control system adapts the pump capacity to the available engine power for greater efficiency and reduced fuel consumption.
| Technical specifications | o Overall dimensions (mm) | |||||||||||||||||||||||||||||||||||||||||
| Specification | Main performance | Overall dimensions Unit:mm) | ||||||||||||||||||||||||||||||||||||||||
| Total weight | 5780kg | Traveling speed (high/low) |
3.7/2.5(km/h | A.Overall length (in transportation state) 5925 | ||||||||||||||||||||||||||||||||||||||
| Bucket capacity | 0.21-0.28(0.23m³) | Slewing speed | 10 rpm | B.Overall width (in transportation state /in operation state)2005 | ||||||||||||||||||||||||||||||||||||||
| Gradeability | 70%(35°) | C.Overall height (in transportation state) 2595 | ||||||||||||||||||||||||||||||||||||||||
| Engine | Ground pressure | 32.75kPa | D.Upper width 1860 | |||||||||||||||||||||||||||||||||||||||
| Mode | 4JG1 | Digging force of bucket |
45kN | E.Height of bulldozing plate 340 | ||||||||||||||||||||||||||||||||||||||
| F.Width of standard track shoe 400 | ||||||||||||||||||||||||||||||||||||||||||
| Type | 4-cylinder 4-stroke,direct injection, overhead valve in-line;water-cooled |
Digging force of arm |
33KN | G.Track gauge (in transportation state /in operation state)1600 | ||||||||||||||||||||||||||||||||||||||
| Rated power | 36kW/2100rpm | |||||||||||||||||||||||||||||||||||||||||
| H.Minimum ground clearance 330 | ||||||||||||||||||||||||||||||||||||||||||
| Maximum torque | 175Nm/1800rpm | l.Slewing radius of tail 1640 | ||||||||||||||||||||||||||||||||||||||||
| Displacement | 3.059L | J.Wheel track 2045 | ||||||||||||||||||||||||||||||||||||||||
| K.Track shoe length 2545 | ||||||||||||||||||||||||||||||||||||||||||
| Capacity of oll and cooant |
raveling section | |||||||||||||||||||||||||||||||||||||||||
| Fuel tank | 130L | Number of track shoes |
40 | Performance Parameters | ||||||||||||||||||||||||||||||||||||||
| Hydraulic oil tank | 85L | Carrier wheef on each side |
Total weight,kc 5780 | |||||||||||||||||||||||||||||||||||||||
| Engine oi | 9.6L | Thrust wheel on each side |
Bucket capacity,m3 0.21-0.25(0.23m³) | |||||||||||||||||||||||||||||||||||||||
| Rated power,kW/rpm 36/2100 | ||||||||||||||||||||||||||||||||||||||||||
| Radiator | 6.5L | Standard track | 400mm | Traveling speed (high/low),km/h 3.7/2.5 | ||||||||||||||||||||||||||||||||||||||
| Final drive | 2×0.9L | Slewing speed rpm 10 | ||||||||||||||||||||||||||||||||||||||||
| Gradeability 70%/35° | ||||||||||||||||||||||||||||||||||||||||||
| Ground pressure,kPa 32.75 | ||||||||||||||||||||||||||||||||||||||||||
| Digging force of bucket,kN 45 | ||||||||||||||||||||||||||||||||||||||||||
| Digging force of bucket rod,kN 33 | ||||||||||||||||||||||||||||||||||||||||||
| Table of Lifting apacity | O Operating range (mm) | |||||||||||||||||||||||||||||||||||||||||
| 3000mn | 550mn | tT | 400mm | 316k | Operating range Unit:mm | |||||||||||||||||||||||||||||||||||||
| Radius of loading point (A) Maximum distance | a Maximum digging height 5690 | |||||||||||||||||||||||||||||||||||||||||
| Height of oading point (B)m |
2.0m | 3.0m | 4.0m | 5.0m | Loading capacity | Distance | b Maximum unloading height 3930 | |||||||||||||||||||||||||||||||||||
| c Maximum digging depth 3815 | ||||||||||||||||||||||||||||||||||||||||||
| m | d Maximum digging depth with vertical boom 3070 | |||||||||||||||||||||||||||||||||||||||||
| e Maximum digging distance 6090 | ||||||||||||||||||||||||||||||||||||||||||
| 4m | kg | 1100 | *1100 | *1150 | 1050 | 4.19 | f Maximum slewing radius 2555 | |||||||||||||||||||||||||||||||||||
| 3m | kg | *1150 | 1100 | *1200 | 850 | 4.8 | ||||||||||||||||||||||||||||||||||||
| 2m | kg | *1800 | 1600 | *1400 | 1050 | *1250 | 750 | *1250 | 750 | 5.11 | g Maximum height at maximum slewing radius 4495 | |||||||||||||||||||||||||||||||
| 1m | kg | *2400 | 1500 | *1650 | 1000 | *1350 | 750 | *1300 | 700 | 5.17 | h Maximum ground dearance with bulldozing plate lifted up 435 | |||||||||||||||||||||||||||||||
| 0m | kg | *2650 | 1400 | 1800 | 1000 | *1400 | 750 | *1400 | 750 | 5.0 | i Maximum cutting depth of bulldozing plate420 | |||||||||||||||||||||||||||||||
| -1m | kg | *3750 | 2650 | *2600 | 1400 | *1800 | 950 | *1500 | 800 | 4.57 | ||||||||||||||||||||||||||||||||
| -2m | kg | *3550 | 2700 | *2200 | 1450 | *1600 | 1050 | 3.77 | ||||||||||||||||||||||||||||||||||
| 1.The lifting capacity is calkulated in accordance with ISO10560 and SAE11097,where limit coefficient of hydraulic system is 0.87 and tilting limit coefficient is 0.75; | ||||||||||||||||||||||||||||||||||||||||||
| 2.The item with the mark *is limited by hydraulic pressure and the item without the mark "*"is limited by stability; | ||||||||||||||||||||||||||||||||||||||||||
| 3.Lifting point is front support hole of bucket rod (excluding the weight of bucket).It is necessary to deduct from the above lifting capacity if additional accessory is installed ucn as bucket etc |
||||||||||||||||||||||||||||||||||||||||||
Our company are engaged in 3 tons-35 tons of undergroup dump truck, mine truck,coal mine with explosion-proof trorless, trorless car, cement mixing tank, mining accessory crane,slag machine, battery, tricycle, undergroup loader, shovel and other transportation equipment manu-strength, attaches great importance to product innovation , realize the rapid development of the enterprise.We set up and attaches importance to the development of technology and quality department , after-sale department. To ensure the customer after-sales service system,and strive to achieve customer satisfaction is our mission. For the purpose of grasping the market develop opportunities, improve ability of resisting risk, and promote cooperation in the international market; for the purpose of responding to national policies issued by State Council on March 13, 2024,large-scale equipment renewal and trade-in of old consumer goods will effectively boost investment and consumption, benefiting domestic construction machinery sell overseas; for the purpose of speeding up participate in construction of The Belt and Road, cooperative development of dommunication and a win-win situation, Qingdao Shanhai Construction Machinery Co., Ltd. is established.
Qingdao Shanhai Construction Machinery Co.,Ltd. is a multi-region, networking,informational,intelligentize with supply management ability of import and export and comprehensive logistics company.We mainly engage in business of China construction machinery all of the world.
Our main products include concrete pump truck, mixer truck, mixing plant, truck-mounted pump, trailer pump,wet shotcreting machine, stationary crushing line, filling pump, electric mixer trucs, electric loader, micro-mixer pump, electric refrigerated truck, electric forklift, electric sweeper, electric sprinkler, electric dump truck, electric heavy-duty truck, electric light-duty truck, mortar station, dry mixing station, sand making building, mobile crushing equipment, and EPC turnkey business, ERP intelligent commercial concrete, construction PC/ALC product, wind power, photovoltaic, energy storage, hydrogen energy, power exchange station and various types of equipment, complete sets of road machinery, excavator, piling equipment, crane, mobile port equipment, roadheading machinery, firefighting equipment, coal equipment, petroleum equipment, etc.. we deal with well-known brands such as Sanny,Chery etc.
At the same time,we are dedicated to work with clients in EPC field all of the world and we have EPC experience successfully,it is demonstration project of globalization trade and service.
){kind=link}